Forum

Bikes built in char...
 
Notifications
Clear all

Bikes built in charging logic ?

2 Posts
2 Users
0 Likes
1,159 Views
Posts: 27
Topic starter
(@carpetpaul)
Eminent Member
Joined: 3 years ago

i can see that with the dual batteries that it works down to 2 bars, then it switches to the second battery. If I partially deplete that second battery then go to charge up, it charges that second battery (the last used battery) fair enough

 

although.... I though I’d noticed it randomly charging the opposite battery at times, and wondered if it was trying to equalise the charge levels of both batteries, or even out the usage of both batteries

 

i might have imagined it, but for those who don’t routinely allow both batteries to charge fully, do you notice the bike swapping between batteries during partial charges ? *

 

* meaning when one battery has reach 2 bars, you move to the second battery, deplete it maybe to half, then do several part charges, do you find it repeatedly partly charging that same second battery.... or do you find it going back to the first ‘2 bar’ battery at all ?

 

Forgive me for probably reading too much into this

 

thanks

1 Reply
Posts: 16
(@camperman63)
Active Member
Joined: 3 years ago

Ehm,

I have 2 batteries and parralleler y thing, it just kept going all week, none of this going to 20 and then 100 on 2nd one, it just seemed to swing between the two, according to the reading on the screen, 45 one minute 33 the next, 19 at the end of the week but then showed 33%" WHY???

 

PLUS DOES NOT CHARGE BOTH AT SAME TIME WITH Y LEAD, EITHER ON OR OFF BIKE! AT THE MOMENT ANYWAYS, ANY HELP ANYONE????

Reply