Great! But I don’t like the mirrors in that way!
Glad you like it, tried the mirrors in different ways but this is the best for me. I prefer them to the originals the handlebars have been turned upside down to give it that cafe racer look, rides really nice.
I really like it. How did you fix the fender and the lights under the seat?
Easy done just remove fender from bike unplug wires to license plate lamp and indicators then remove license plate holder with built in lamp and then unscrew / unplug indicators from fender. Then place lamp and bracket under rear seat behind tail light and secure with cable ties to frame. Then place indicator lamps in grooves by side of lamp they fit just right and then cable tie secure. Tidy all wires so can't be seen and then plug them back in correctly. See photos attached all works correctly and very neat finish.
@tezza that sounds very easy. Thank you for the explanation 🙂 you said: "Then place lamp and bracket..." What bracket? Can you help me with that?
@themazedammit my license plate was attached to the original fender with a bracket and lamp I presume yours would be the same but it may be different on your model or your country.
If there is no bracket you can buy them online or have a go at making your own out of tin metal its easy to cut and manipulate but not as easy as this one. the other option is buying an after market tail tidy. They are a bit more expensive and might not look the same. Good luck!
This is the link I found for above it might help give you an idea. 
&imgrefurl=https%3A%2F%2Fjapan.webike.net%2Fproducts%2F22772366.html&tbnid=xilvc_KYOhlg2M&vet=12ahUKEwj9pY7QqODqAhWinksFHcUNAHgQMygMegUIARCfAw..i&docid=_xJS126zY8yhuM&w=1280&h=1024&itg=1&q=tail%20tidy&client=safari&ved=2ahUKEwj9pY7QqODqAhWinksFHcUNAHgQMygMegUIARCfAw
