Forum

Error 95 hull senso...
 
Notifications
Clear all

[Solved] Error 95 hull sensor replacement fix

3 Posts
1 Users
0 Likes
349 Views
Bozarre
Posts: 3
Topic starter
(@bozarre)
Active Member
Joined: 4 months ago

Hi everyone !
I wanted to share a fix I did to my SuperSoco TC.
One day it fell on its side during a stormy day. The handle bar was all twisted so I replaced it (with one made of steel). Everything looked right but when I drove it I got the error 95 on the screen and it stopped moving. So I checked online what was this error about and it's the accelerator sensor that was probably damaged. I could replace the all unit but since I know a bit about electronic and I had nothing to loose trying to fix it I disassembled the accelerator handle. I found the sensor, it was quite hard to remove because it was glued to the frame. I checked the sensor IDs and I had some laying around that could be compatible (also I read somewhere the sensor was sending 0 to 5V). I used this sensor (49E419) to replace the original and it works !

2 Replies
Bozarre
Posts: 3
Topic starter
(@bozarre)
Active Member
Joined: 4 months ago

The installation in the handle :

Reply
Bozarre
Posts: 3
Topic starter
(@bozarre)
Active Member
Joined: 4 months ago

To original sensor. With the glue we cannot see every numbers. Maybe someone can tell me what it's supposed to be ?

Reply