Forum

Won't start, no rea...
 
Notifications
Clear all

Won't start, no reaction on throttle

2 Posts
2 Users
0 Likes
915 Views
Posts: 1
Topic starter
(@andyman)
New Member
Joined: 1 year ago

Hey guys!

I have got two Super soco TS, one 2018 and one 2022, bought as a repair project and here is the problem with 2018:

Connect battery, turn on power switch next to battery, now the bike turns on with display, battery etc. The start button to turn on lights normally but can't be turned on or off, but if you hold it, it makes a sound. 

All lights work, near and far, braking lights and turn signals. But the bike is on "Ready" mode all the time, even though the kickstand is down.

Tried to replace the sensor wire with another from the other TS bike but possible it is a fault with both. Have tried to do as a guy in YouTube said, to bypass it and then see, but no reaction.

On the throttle there is no reaction and on the red park button nothing happens. Have tried to replace it with the other one, but possible both have this problem, though it seems fine. 

Heard it might be the wheel hub sensor so tried to connect wheel from the other one, but no luck. Have also tried with the other controller and AC box, but still nothing. 

So it's stuck in Ready mode no matter what, but other than that, display, lights, braking etc works as well as battery and BMS it seems. No Bluetooth on this one. Can show you a video if you want.

Thanks!

 

Regards, Andreas

Topic Tags
1 Reply
viroidal
Posts: 4
(@viroidal)
Active Member
Joined: 4 years ago
  • Hi Andreas... could you finally fix it? My TS was charging last night and this morning I found it switched on. The only way to swicht off now is from the battery. Remote does not work at all, and it switchs on/off only through the battery plug. Lights and so on work ok, but it is in Ready all the time and a Mode 0. The button for Mode 1 2 3 does not work and neither the red parking button nor the throttle 

Any ideas? ECU? Controller??

Thanks

Reply