Forum

How to delimit/tune...
 
Notifications
Clear all

[Solved] How to delimit/tune up/de-restrict your Super Soco TS/TC/CU

77 Posts
36 Users
10 Likes
164.9 K Views
Posts: 1
 BRUH
(@bruh)
New Member
Joined: 4 years ago

When I first bought my TS1200r the derestriction worked. I later on had to turn it into service because it wouldn’t work. There was a malfunction in the system where as the engine could not send out signals to the system. I dont know all the details but i think it was something like that. So i got a new engine and now everything works. Except for the derestriction. My max speed is now only 45 sometimes only 44 km/h. Can anybody help me? Its like it is stuck in restriction mode. I have tried multiple times but it still doesn’t work. Please help?

Reply
Dasoka
Posts: 10
(@dasoka)
Active Member
Joined: 4 years ago

TSX cant be derestricted by this method. Confirmed by VMOTO. 

Reply
Posts: 3
(@riks4039)
New Member
Joined: 4 years ago

mine is ts max but mine is able to go till 80kmph max till now any suggestion to improve its speed

Reply
m66
Posts: 78
 m66
(@m66)
Estimable Member
Joined: 4 years ago

TC/TS have speedo calibrated for bigger tires. On stock 45 is... 36... also 70 is like 55 or so. Checked with speed trap. With 130/80 in the rear it looks correct, also checked with speed trap. So real max speed is around 55 to 60km/h. This pisses me off, it should be illegal tu set speedometers it bike so high up like this, this is fucking dangerous... 

But now "mystery" why scoots are faster than locked socos is resolved.

Also de-restriction sequence for all but TSX is easy to find on YT. It will take you 30 seconds to minute. 

Reply
Posts: 5
(@the_green_fury)
Active Member
Joined: 3 years ago

Hello, I was trying to derestrict my super soco ts1200r 2017 today but it didn’t work

i have try the thing when you do stuff with your break and gas but When I do it with the stand down it dosent show code 95 the thing I do when the stand is down it just restrict my super soco to 15km/h at all of the mode but when I have the Stand up and trying the same procedure again it says error code 95 but the speed doesn’t change at all.. can someone help me?

Reply
Page 8 / 9