Forum

Notifications
Clear all

Tire Change

2 Posts
2 Users
0 Reactions
165 Views
Posts: 2
Topic starter
(@helloethnic)
Active Member
Joined: 7 months ago

I'm using this bike since 2 years and now my friend told me "you tires is dead, you should change it" and here i am to get some advice.

Factory size front : 90/80-17

Factory size rear : 120/70-17

My dealer says we have ANLAS tires as ;

MB -34 Front : 90/90 - 17 M/C 49P TL

MB -34 Rear : 110/80 - 17 M/C 57P TL

 

Is it okay to put these?

MB -34 is this one below

1 Reply
Posts: 7
(@retrosoco)
Active Member
Joined: 3 months ago

The ANLAS MB34 90/90-17 front will (in theory) place your front axle 9mm higher off the ground. The overall outer diameter will be 18mm more than the previous stock Cordial 90/80-17 tyre. The ANLAS will have the same width.

The ANLAS MB34 110/80-17 rear will (in theory) place your rear axle 4mm higher off the ground. The overall outer diameter will be 8mm more than the previous stock Cordial 120/70-17 tyre. The ANLAS will be slightly narrower.

Both tyres should physically clear your mudguards. Handling is unknown because the rubber compound of the ANLAS might also be different and not just the physical dimensions, but any change will most likely be negligible. However, you must decide this for yourself and take the risk.

I have changed my tyres to Pirelli Angel CT 100/80-17 front and 130/70-17 rear (because that was what's available for me at the time) and they work perfectly fine - although I found the rear Pirelli Angel CT to have a very tight fit and was difficult to mount on the rear rim.

.

Reply