Last seen: 05/10/2022 12:51
@dafal you need connector, and some wires. I located rear light wires and wired new one the same way as factory one.
Mods are tricky. Rear suspension is easy, fabricating locking plates, shocks etc. But front. They are 45/47 when standard is 45/48 (upper/lower triple...
I'm buying from the shop you mentioned and from- they have crashbars that works, I know coz I crashed hard 😉
As @sali_man1 said. Change the tires, stock ones get hard in relatively high temp, They are made for Asian market not for more norther regions.
best is to adapt. You can get software update to change this, but it's not worth it. I burned one ECU with update and switched to one without it. The ...
oof that's criminal!
any will fit, I use paddock stands on standard TC so you should be ok on MAX. Both swingarm and head.
it's from speedo or radar? Speedo adds 15% to real speed on stock tires
@sali_man1 extenders are good for experiments. I just bought 260mm long pitbike shock I will probably change it for 270. I'm 178cm high and 280mm rise...
check if your battery is fully charged - 1change the battery in the key - 2take down the farings and inspect wiring harness and connectors - 3
2 car jacks under the foot rests - old but gold.paddock stands, like those two. You need just flat attachment for the rear.
Nice mod! How much space you have between new mudguard and tire (I wonder if my 130/80 will fit)
rubbing is from "floating brake" caliper design....
Hi, this is difference in capacity, you should be ok, BMS on the battery should protect it. You will have slightly reduced range, and last 10 to 15% o...
You need to cut under the socket thru the glue, when you do this in like 2/3 circumference slide something under the rim and gently pry off. You shoul...