Hello,
I have this connector for sale.
Came from a functional battery, I am just swapping to a different BMS for a project.
Removed it from a "43Ah" battery.
Open to any offers, will ship within EU
Hi ArieKanarie,
Unfortunately I don't need a new BMS but would you be so kind to explain how you removed the battery connector from the battery?
I need to replace the connector and it is very stuck in the battery. I don't want to use more force than is required, so not to dfamage the battery.
Thanks, Hans
@vvscooter I am assuming that you mean the wide grey balance connector?
There is a tab on the battery side of the connection that you need to press in. While pressing you need to pull quite hard. I remember kind of wiggling it out.
Be sure to pull on the connector and/or small pcb it's mounted on, not the flex cable itself.
@vvscooter If you mean the black connector in the lid of the battery:
I took a knife to the epoxy that surrounds the plug on the inside.
Just made a cut around it as best as I could and then pressed it from inside to the outside hard. Didn't take that much force but still needed two hands
Thanks ArieKanarie,
I have succeeded to replace the battery connector and was lucky to have received the correct spare part from AliExpress.
Unfortunately the Vmoto dealer turned out to be no help at all in finding or procuring spare parts.
