Forum

Is the battery fully charged? Where are you measuring the 18V? If possible I would try and measure the voltage at the main battery terminals (so ...

@lhk It is where I got the crack module from. I actually have one of their controllers already, it's dead but thats another story, The main issue I ...

Ridden the bike a fair bit this week and have nearly refined the settings to where I like them. once I have them where I am happy I will post them up ...

@nickpd99 Using the VEC300 you will lose your instruments as there is no RS485 output as standard. I have a VEC300 that I fitted to my Max briefly a...

@lhk Yes currently still on the stock tires, I have been looking at getting some better ones and possibly a slightly larger rear at the same time. I...

@lhk Yeah that sounds likely. So the changes made last night have again increased performance, I can't say by how much as I didn't get a clear run e...

@lhk Interesting that you have 2800rpm and the controller was set to 3000rpm as standard. Reducing the motor rpm to 2900rpm made a noticable differe...

Hmm, well I have ridden the bike to work for the last couple of days, monday was with the stock settings and it pretty much rode like stock, no surpri...

@lhk The horn is a Low tone Hella unit I got from amazon :-/p> It is noticeably louder and also has a deeper tone which I prefer.

I realised that in my first post I mentioned I had replaced the rear shock but kept the stock spring, but didn't go into any detail of why I chose to ...

Just to add the information. The TC max controller is as far as I can establish a rebadged Lingbo HC3X which I believe has 24 FETS it also has the C...

@drift Cheers. Hopefully it will help others if they decide to disassemble the battery if they need to. I have realised putting the battery back ...

Decided to just go for doing the BMS bypass, as I haven't had time to fit an ammeter to the bike and then ride it. So first off I removed the sticke...

Mine does this sometimes, I have found pushing the battery cover down whilst turning the key gets it free.

@drift Hi, The hugger mod was actually pretty simple and quick to do. I just used masking tape to mark the curve I wanted and then having removed i...