Last seen: 14/03/2024 20:07
@simon_duguay You don't need to disconnect the controller to program it, you just need to switch power off and let the USB power the controller whilst...
@centrjpn I got one from Aliexpress. just search for Super Soco BMS.
@paslecwar sorry only just noticed this. I have some stockish settings but not completly stock. They are on my laptop which I don't have to hand at ...
That's a nice upgrade and didn't look to be to challenging to build. I can see me getting a new battery in the future, maybe even going to 96V nominal...
@berserk-healerpl I believe you have the early type controller then, what year is yours?
Been riding this a fair bit since my last update and all was going fine. I did end up changing the BMS for a 300A one (although I am still running byp...
@berserk-healerpl this image should help. its a small six pin connector it has a rubber cover normally.
@berserk-healerpl Sorry, I don't understand the question. The programing lead plugs directly into the controller @ the small connector under a rubbe...
@flyingelectric I think that you will find the stock TC Max spring will work fine for you, I think the limited travel of the stock shock is what m...
@heiltdo I believe it was actually a 300lb spring, I would guess that the stock spring is around 400lb. The stock spring fits just fine and with a sen...
The rear shock doesn't have any markings on it, however it is 280mm eye to eye and gives a massive 18mm of travel. I replaced mine with a 290mm DNM MK...
@berserk-healerpl You need a programming from golden motor :- Programing Lead and Lingbo software v4.0.0 :- Software
@biker2000 Certainly on the TC Max battery the 4 small wires are for the can bus comms to the instruments, I believe that they also allow the BMS t...
So I am now reasonably happy with the settings I now have on the bike, I am just trying to dial out the speedo error. As promised here are my settin...
@nickpd99 Your welcome. I have the 80A breaker bypassed on the discharge side, so I still charge through it and it still switches off the power to res...