
Last seen: 23/09/2023 18:53
@prestige my bike had the later controller mounted low down. I don't know anything about the earlier front mounted controller sorry.
@prestige Hi, I unfortunately no longer have the programing cable for the original controller. I have now, I hope, sourced all the parts to do the c...
@docweyr details are earlier in this thread :-
@docweyr I am using the Fardriver ND72530. I am also using the stock motor and stock battery, although the BMS is bypassed on discharge. I have upgrad...
@tonyb I feel like it is no worse, but I have no hard data to confirm my feelings. I have been doing the same commute for nearly 2 years on the bike...
@tonyb I am very happy with the fardriver controller, The gains in performance are really nice, especially when dealing with busy road juctions. I nee...
@tonyb these parameters control the rate of acceleration and deceleration, I think the numbers relate to revolutions per sec. for example, lowering th...
@tonyb I haven't played with the stock forks, I replaced mine with some fully adjustable pit bike forks, as although more expensive, this was less tim...
@tonyb this is the lowest number I found worked with the field weaking to give me maximum speed. Lowering the number reduced the top speed and raising...
And installed 😀 Need to ride it a bit now to see how well I have it set up.
Rear brake pedal assembly V1.0 built and painted, just need to drill 2 holes in the frame to bolt this to, connect the caliper, bleed the system and t...
@franfranfran84200gmail-com Hi, Thanks for the kind words. I have completely repalced all the wiring on my bike, partly to simplfy things (remove t...
Anything is possible, and as an engineering exercise it would be interesting. I believe you will need a TC Max swing arm or too modify the TS one as...
I forgot to say that the rear shock is now a DNM Hornet 295mm MT-RC MX arm rear shock with a 1000lbs spring. To get the static sag I was after I had t...
@prestige after the very quick test ride I had yesterday. I would say that the forks work very well on road, the spring rate is higher than the stock,...