Last seen: 25/06/2024 18:46
Completely power down your vehicle [battery's OUT of the vehicle], disconnect the ECU[ leave it disconnected!] and check if code 83 disappear. If ok, ...
This is a workaround, not a solution. The real solution is matching software for battery & Controller.
Yes, this is a 2 year contract.
1] Bikes produced before Q2 2022 have Supersoco ECU installed[optional !]. 2] Bikes produced after Q2 2022 have VMOTO ECU installed [also optional].3]...
This isn't acual anymore because the Supersoco app is replaced By VMOTO App
You have to replace the bike side connector cable, it's available in official Supersoco dealers. The adapter cable you need for your charger.
No, this cable only for charging.
Most likely your bike is not equipped with the DATA module, this depends whether your importer has opted for this module or not. Bikes produced bef...
Check your user manual Page 16
The slow chargers are, the superchargers are not. The SOH function is not active in the battery firmware, you will see 100% always.
Higly unsafe to charge the battery with a uncontrolled charger. [charger and battery communicate during the charging process].There is a 8A charger av...
Is your contract still valid ?
Go to a official SuperSoco dealer.
6 Pin = TCpro[85kmh] [identification 7245P on the bottom label] 7Pin = TCmax[95kmh]. [Identification 7245B on the bottom label] Those are di...