Last seen: 25/02/2024 08:05
Price of TS and TC's for easy sake was 3000 dollars or euros when I got mine in the end of 2018. TC-max was at 4000 with a bonus program deal on the g...
There's also the possible fault of the red triangle button at the throttle side, right side that can be a little bit jiggly. If it causes other effect...
My original controller on the front like were a radiator usually would be didn't work. It didn't have any special connector but i had to put in all ca...
So it seems that my "Type 2" connector adaptor really was a good buy. It seems to be able to charge any place it can physically fit so some charger wo...
New information. Finally a friend of mine I meet recently also made one for his TC that I gave him. Although I only gave him the frame, front fork w...
In a sense. A lucky error. It would be worse if the bike was bricked and non working. Speed can be maxed out by the 3 button settings as you probabl...
Thanks for the info. Yes, I realized that later there are a few parts that are needed to be changed and some are installed with very high torque like ...
I had a similar problem once after I let the battery sit for a month without use some years ago with my original Super Soco TS battery. What I did w...
Cool. I'll remember that. Mine are jumping up and down like crazy, especially at or around 50km/h and my throttle is a little jerky as well. I might e...
Failure in the alarm unit. Very common problem I think . It's kind inside the small electronics that doesn't like high voltages as the efficiency go d...
Yeah. Bureaucracy. So much to get that info that you ask for and know. Then the seller says: No, I don't know anything about that. Then you insists an...
With my older TS. 2018 EU version I think I used dumb charger via the external port to charge the bike and it worked exellent. I think I had that 10...
Welcome and enjoy your bike!
So I solved it finally! error code 98 is both kind of too much and too little power in a sense. I upgraded my controller to use more amps which can ...
So you are connecting battery full positive voltage to the yellow. I would check the schematics from the alarm module. The button is connected to th...